home *** CD-ROM | disk | FTP | other *** search
/ Amiga Plus Leser 19 / Amiga Plus Leser CD 19.iso / Tools / ShareMailGiftware / PhotoFolio2.1Update2 / PhotoFolio2.1.readme < prev    next >
Encoding:
Text File  |  2002-11-17  |  14.8 KB  |  385 lines

  1. PhotoFolio 2.1 Update 2
  2.  
  3. Copyright (C) 2000 by Steeple Software
  4.  
  5. Distributed by Schatztruhe
  6.  
  7.  
  8. 14th December 2000
  9.  
  10. In this document, you will find the following information.
  11.  
  12. 1. Copyright
  13. 2. Support
  14. 3. Installing the 2.1 update
  15. 4. Whats new
  16. 5. Thanks
  17.  
  18.  
  19.  
  20. 1.COPYRIGHT
  21. =============================================================================
  22.  
  23. Copyright (C) 2000 by Steeple Software
  24.  
  25. All mentioned trademarks are subject to their owners.
  26.  
  27. The author is not responsible for any damage caused by the use or misuse of
  28. this documentation and/or the program(s) it describes.
  29.  
  30. This program and its related documentation, utilities and examples are
  31. provided "AS-IS" and subject to change without notice; no warranties are
  32. made. All use is at your own risk. No liability or responsibility is
  33. assumed.
  34.  
  35.  
  36. PHOTOFOLIO LICENSE AGREEMENT
  37.  
  38. PhotoFolio (hereinafter "programs" or "the program") and its related
  39. documentation, utilities, and examples (C) Copyright 1999-2000 Steeple
  40. Software. All Rights Reserved.
  41.  
  42. 1. Specific files from the PhotoFolio CD may be reproduced and distributed
  43.    separately under their own licensing arrangements subject to agreement
  44.    with the authors.
  45.  
  46. 2. The program may not be reproduced, modified or sublicensed in any way.
  47.  
  48. 3. The license to use this copy of the program is extended to the original
  49.    purchaser only. Upgrades and technical support are available to the
  50.    original purchaser only.
  51.  
  52. 4. The related documentation, utilities, and examples provided by Steeple
  53.    Software may not be reproduced or distributed, in whole or in part.
  54.  
  55. 5. The licensee shall hold Steeple Software and its management and
  56.    employees (this includes Steve Quartly and Paul Huxham) harmless from
  57.    any and all claims, damages and liabilities resulting from or arising
  58.    out of its use.
  59.  
  60. 6. Steeple Software may terminate this license at any time, with or without
  61.    cause. This license and Licensee's rights hereunder will automatically
  62.    terminate upon any breach of these terms and conditions. Upon any such
  63.    termination, the licensee shall destroy all copies of the program and
  64.    the related documentation, utilities, and examples in its possession.
  65.  
  66. 7. You are not required to accept this License, since you have not signed
  67.    it. Should you choose not to accept this License, you should return the
  68.    program to the place of purchase.
  69.  
  70.  
  71. WARRANTY
  72.  
  73. 1. Except when otherwise stated in writing the copyright holders and/or
  74.    other parties provide the program "as is" without warranty of any kind,
  75.    either expressed or implied, including, but not limited to, the implied
  76.    warranties of merchantability and fitness for a particular purpose. The
  77.    entire risk as to the quality and performance of the program is with
  78.    you.
  79.  
  80. 2. In no event unless required by applicable law or agreed to in writing
  81.    will Steeple Software and its management and employees (including Steve
  82.    Quartly and Paul Huxham) be liable for damages, including any general,
  83.    special, incidental or consequential damages arising out of the use or
  84.    inability to use the program (including but not limited to loss of data
  85.    or data being rendered inaccurate or losses sustained by you or a
  86.    failure of the program to operate with any other programs), even if you
  87.    have been advised of the possibility of such damages.
  88.  
  89.  
  90. END OF TERMS AND CONDITIONS
  91.  
  92.  
  93. 2. SUPPORT
  94. =============================================================================
  95.  
  96. For the latest patches, upgrades and information on PhotoFolio, check out the 
  97. PhotoFolio home page at:
  98.  
  99. http://steeplesoftware.dragonfruit.org
  100.  
  101. Steeple Software would like to encourage you to register PhotoFolio at the
  102. PhotoFolio home page and to join the mailing list to receive information.
  103.  
  104.  
  105. To join the PhotoFolio users mailing list, point your browser at:
  106.  
  107. http://www.egroups.com/group/photofolio
  108.  
  109.  
  110. The authors email addresses are:
  111.  
  112. Steve Quartly
  113. steve@quartly.net
  114.  
  115. Paul Huxham
  116. paulhuxham@yahoo.com
  117.  
  118.  
  119. 3. Installing the 2.1 update
  120. =============================================================================
  121.  
  122. To install the 2.1 update, run the installer update script which will
  123. update the PhotoFolio executable and install updated libraries. You will
  124. need your original PhotoFolio CD to install the update.
  125.  
  126. The language catalogs are not ready yet, but we have decided to release the
  127. free 2.1 update now so that you can benefit from the new features. The new
  128. features of PhotoFolio will appear in english until the translators have
  129. finished translating the locale catalogs. Locale catalogs will appear on
  130. the web site when they are available. (Also notification on the mailing
  131. list.)
  132.  
  133. Your current PhotoFolio program settings will continue to work.
  134.  
  135. You will need to reregister PhotoFolio 2.1 (locally, not on the Internet)
  136. when running it for the first time.
  137.  
  138.  
  139. 4. Whats new
  140. =============================================================================
  141.  
  142. Update 2 fixes some install script problems.
  143.  
  144. We have chosen to add some of the features previously planned for V3.0 into
  145. the free V2.1 update.
  146.  
  147. A few of the new facilities include rename, folder support in the listtree,
  148. more drag and drop support, and PowerPC support for some libraries. There
  149. have been a lot of low level 'under the hood' changes making the code
  150. faster and more reliable (hence the size of the patch).
  151.  
  152. Although this document is long we ask that you take the time to read
  153. it to see what exactly has changed.
  154.  
  155. Currently there is no official documentation for the 2.1 update, but it is
  156. being worked on and will be made available on the web site when it is
  157. completed.
  158.  
  159. Most new features do not require complex instructional procedures.
  160.  
  161. Below you will find a comprehensive list of added features.
  162.  
  163.  
  164. General - features
  165. ==================
  166. *    Now, only one PhotoFolio can be running at any time.
  167. * Project icons are saved along with saved projects (depending on
  168.   settings).
  169. *    Added Shell parameter PROJ or PROJECT to load a project at runtime.
  170.     Works concurrently with shell paths (you can use both and they are
  171.     merged).
  172. *    Added workbench icon loading of projects, however only one of a
  173.     multiselected icon project group is loaded at this stage.
  174. *    If you double click a project with PhotoFolio already running, it
  175.     will talk to the running PhotoFolio and load the project, similarly
  176.     with the shell paths if launched from a Shell.
  177. *    If you run a PhotoFolio and then try to run another one, the original
  178.     one will become uniconified (if it is) and brought to the front. If you
  179.     pass in either chell paths or a project it will also start processing
  180.     those.
  181. *    Now any time the current project is about to be modified in a major
  182.     way if it hasnt been saved, the user is given the choice to save
  183.     first, ignore or cancel.
  184. *    When quitting, you are asked to save the project first, differently,
  185.     depending on if confirm quit is enabled/disabled.
  186. *    Added Project menu item 'Information' which maintains information
  187.     about the project.
  188. *    A one character minimum is now required for registration name and
  189.     country entries, previously set at 5 characters.
  190.  
  191.  
  192. Settings window - features
  193. ==========================
  194. * Added show subtaskpriority. Setting this value too high will prevent
  195.     the display from updating.
  196. *    Added a user selectable proof font. This font is used for the text
  197.     underneath a proof. You can choose any font and size. Every browse
  198.     window can have different proof settings.
  199. *    Added other settings:
  200.         *    Copy file comment to proof - If enabled, when creating
  201.             proofs, the image files comment is copied to the proofs
  202.             comment.
  203.         *    Auto gamma correct on make - If enabled, corrects the gamma
  204.             on proof creation. This will make the creation slower.
  205.         *    Save icon with project - If enabled, icons are saved with
  206.             project files.
  207. *    'Add paths as tree or flat' now indicates that the paths added to the
  208.     main window should be added in tree or flat mode, not whether the
  209.     list is displayed as tree ot flat.
  210. *    The 'abbreviated paths' setting is now obsolete.
  211.  
  212.  
  213. Browse window - features
  214. ========================
  215. *    The sort mode is now also selectable by a small pop up gadget next
  216.     to the sort status line.
  217. *    Save image as now supports all save formats provided by
  218.     imageio.library (still currently only JPEG).
  219. *    Added a progress indicator and the ability to abort the following
  220.     operations. The windows also open a reasonable width as default.
  221.         *    Gamma correction
  222.         *    Saving proofs
  223.         *    Deleting proofs
  224.         *    Moving proofs
  225.         *    Copying proofs
  226. *    Added rename a single proof/image in the browse window. The two
  227.     rename modes work differently to each other. If you rename a
  228.     single proof, the text below the proof is removed and replaced with
  229.     a string, ok and cancel gadgets. You can leave the proof in rename
  230.     mode and scroll the browse window, show images etc before actually
  231.     renaming the proof/image. You can also have as many proofs as you like
  232.     in rename mode simultaneously.
  233. *    Added rename selected proofs via a requester. This opens a requester
  234.     where you can rename all the selected proofs. This is a different way
  235.     to rename from the rename single proof, but achieveing the same end
  236.     result. The browse window is unable to used while this requester is
  237.     open.
  238. *    Closing a browse window closes all attached windows (e.g.
  239.     information windows). Only Information windows are attached to browse
  240.     windows. If you need an information window to stay open after the
  241.     browse window is closed, remember to deatch it first (see Information
  242.     window below).
  243. *    Added NONE to the sort methods.
  244. *    Added 'Refresh' to browse menu to reload the current path into the
  245.     browse window.
  246. *    Dragging and dropping a proof that is already created also copies
  247.     the original proofs file comment and datestamp to the new proof.
  248. *    When loading a browse window, the files are sorted before loading,
  249.     so even if paused the display is correct.
  250. *    Every browse window can have a different setting for the font to be
  251.     used for text displayed beneath the proof. See settings window.
  252.  
  253.  
  254. Make window - features
  255. ======================
  256. *    Added new make settings:
  257.         *    Copy file comment to proof - If enabled, the image files
  258.             comment is copied to the proofs comment.
  259.         *    Auto gamma correct on make - If enabled, corrects the gamma
  260.             on creation. This will make the creation slower.
  261.  
  262.  
  263. Copy - features
  264. ===============
  265. *    When copying a file, the date stamp and file comment of the source
  266.     file are copied to the destination file.
  267. *    Copy checks if the destination is write protected and if so asks
  268.     the user to retry or cancel.
  269. *    You can answer 'No to all' for overwriting of files.
  270.  
  271.  
  272. Move window - features
  273. ======================
  274. *    When moving a file, the date stamp and file comment of the source file
  275.     are copied to the destination file.
  276. *    Moving images does not bother updating the browse window until
  277.     finished and also sleeps the browse window while moving.
  278. *    Move checks if the destination is write protected and if so asks the
  279.     user to retry, cancel or copy instead.
  280.  
  281.  
  282. Main window - features
  283. ======================
  284. *    The listtree menu has 'Show Path' which shows all the files in the
  285.     path in a show window in sequence.
  286. *    The listtree menu has a folders section. You can add, delete and
  287.     rename folders. Folders can contain other folders. You can drag
  288.     and drop any path or folder to any path or folder. Double clicking a
  289.     listtree folder adds the path to the folder that is clicked on.
  290.     Folders and paths can be renamed. So if you add a path and dont
  291.     like the name of the path, you can renmae it.
  292. *    Listtree context menus now display the entry name clicked on as the
  293.     title in the context menu so you know which entry you clicked on.
  294. *    Added 'Make path' and 'Make all paths' to the main window menu.
  295. *    Added open information window to the main menu.
  296. *    If a project file is dropped onto the listtree, it is loaded.
  297. *    Folders are created automatically for default operations. E.g.
  298.     'Add one path', "Workbench icons' etc.
  299.  
  300.  
  301. Attribute window - features
  302. ===========================
  303. *    Now has a progress indicator.
  304.  
  305.  
  306. Information window - features
  307. =============================
  308. *    There can now be multiple information windows open.
  309. *    Information windows are 'associated' with browse windows. That is, the
  310.     information window 'belongs' to the browse window that opened it. If
  311.     a browse window is closed, all associated information windows are also
  312.     closed. You can 'detach' an information window from the detach menu
  313.     item in the information window.
  314. *    The information window has 'Detach from parent window' in its menu to
  315.     unassociate the window with its parent window (whoever opened it).
  316. *    Dropping a proof on an information window associates that information
  317.     window with the browse window the proof is in.
  318. *    Workbench icons can be dropped onto the information window, including
  319.     files, directories and devices. If the dropped file is an image or a
  320.     proof, its information will be extracted and displayed. Otherwise only
  321.     relevant fields of the information window are enabled.
  322.  
  323.  
  324. Show window - features
  325. ======================
  326. *    'Save image as' now supports all save formats provided by
  327.     imageio.library (still currently only JPEG).
  328. *    Dropping workbench icons onto the show window now attempts to load
  329.     all dropped files.
  330. *    Added 'Information...' menu item to the show window context menu to
  331.     open an information window about the currently visible image.
  332. *    The loading subtask priority can be set from settings. Tweaking this
  333.     may or may not improve the performance of loading on your machine.
  334.     If you use progressive loading, having it set too high will result
  335.     in the image not showing until loading is completed (because the
  336.     loading task has a higher priority than the viewing task).
  337.  
  338.  
  339. ARexx - features
  340. ================
  341. *    The settings item ABBREVIATEDPATHS is obsolete.
  342. *    The settings item LISTTREEMODE now controls the way paths are added
  343.     to the listtree.
  344. *    Added NONE to the sort arexx command.
  345. *    Added new release 2.1 settings to arexx.
  346.         *    SHOWTASKPRI
  347.         *    PROOFFONT
  348.         *    PROOFFONTSIZE
  349.         *    COPYFILECOMMENTTOPROOF
  350.         *    SAVEICONWITHPROJECT
  351.         *    AUTOCORRECTGAMMA
  352. *    Added command NEWPROJECT.
  353. *    Added commands GETPROJECTATTRS, SETPROJECTATTRS
  354.         *    FILENAME (this is a get only parameters)
  355.         *    OWNER
  356.         *    SUBJECT
  357.         *    DESCRIPTION
  358.         *    COMMENTS
  359.         *    REVISION
  360.         *    SAVED (this is a get only parameter)
  361.  
  362.  
  363. 5. Thanks
  364. =============================================================================
  365.  
  366. Steve and Paul would like to extend special thanks to many people who have
  367. helped to bring PhotoFolio to life. The list below is by no means complete
  368. or in any particular order, but we hope you will forgive us if we forgot
  369. you. Everybodys input has been invaluable.
  370.  
  371. Thanks:
  372.  
  373.   Debra - Lots of love and patience!
  374.   Tuyen - Your love, patience and understanding
  375.   Stefan Stuntz - MUI
  376.   Timm Müller - guigfx.library and mysticview.library
  377.   Dieter Müller - Schatztuhre
  378.   Oliver Esberger - German translation, toolbar images, beta tester
  379.   David Ceulemans - Beta tester
  380.   Andreas Kleinert - Beta tester
  381.   Vit Sindlar - Czech translation, beta tester
  382.   Amiga Inc - Amiga
  383.     Haage and Partner - Amiga platform support
  384.   Olaf Barthel - So much excellent source code, OS 3.5 and more
  385.